Rotary table single axis controller
Previous
Next
SilverCNC rotary table single axis controller,cost-efficient solution to achieve 4axis funtion for machine no simultaneous function
No need to have separate programmes on the machine tool and the touch screen,
Even year 2000 machines can achieve multi angle machining,
RS232 mode and I/O mode are optional
Features:
1.For machine NC without 4th axis function,
2.Machine tool is old and the motor and drive have been discontinued,
3.Reduce the budget for adding a 4th aixs rotary table
4.If you factory has many machine tools with different controller,single axis rotary table can be universal between different controller.
SilverCNC single axis controller components
The single axis controller system package which includes a servomotor, amplifier, touch screen and cable kits.
1.The servo motor and driver are customized by SilverCNC, and the driver has built-in PLC function
2. The touch screen integrates handwheel function and 4th axis control function, such as the ability to adjust motor parameters, driver parameters, rotary table signals, braking, parameters and so on.
3. Includes power cable, 4th axis table cable, I/O cable,RS232 cable (option)
Single Axis Controller Main Funtion
This video will demonstrate how to set the zero point of the rotary table correctly.
This video will demonstrate how to manually set the desired rotation angle correctly.
This video will demonstrate how to control the rotation of the rotary table through a program.
Category | Function |
Inch mode | Manual adjustment, Convenient technicians to debug |
Accuracy test | Test the accuracy of rotary tables and fixtures no need |
Zero point | Calibrate the rotary table zero point automatic |
Rotary table parameter setting | Rotary table direction Rotary tbale limit Backlash compensating Gear radio setting Braking function setting |
Rotary table parameter setting | Servo Gain Parameters Current loop Motor load rate display Speed and position display |
Diagnosis | Servo drive input signal status monitoring Position monitoring Output signal monitoring Alarm Information Window |
1.The following video demonstrates the application of C180 four axis and single axis controllers on Siemens 828D system,
2. Using R232 interface to interact with Siemens system,capable of rotating at any angle,
3. All functions can be achieved with just one touch screen
